Probing

Post Reply
erniehatt
Posts: 281
Joined: Thu Nov 03, 2016 8:16 am

Probing

Post by erniehatt » Sat Mar 14, 2020 1:33 am

OK now I have the Machine running nice and smooth, I wish to set up a probe, can anyone explain how to do it please.

Mikeymp66
Posts: 17
Joined: Mon May 20, 2019 5:19 pm

Re: Probing

Post by Mikeymp66 » Sat Mar 14, 2020 10:04 pm

Try the grbl site at github he has a lot of info on how to set up probing set up is in the camera tab and a probe just needs to short to pins together to work a nail on your z head wired to one pin and a conductive work platen wired to other pin and probe should work .It can be very simple or you could do any thing even powered probe with relay switching.

Mikeymp66
Posts: 17
Joined: Mon May 20, 2019 5:19 pm

Re: Probing

Post by Mikeymp66 » Sat Mar 14, 2020 10:08 pm

Sorry not grbl but bcnc on github shows how to set up probe

erniehatt
Posts: 281
Joined: Thu Nov 03, 2016 8:16 am

Re: Probing

Post by erniehatt » Sun Mar 15, 2020 9:38 am

Thanks very much

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests