External drivers

Post Reply
ckoppenaal
Posts: 8
Joined: Fri May 18, 2018 1:11 pm

External drivers

Post by ckoppenaal » Sat Apr 20, 2019 11:09 pm

Are these in the proper way?
Attachments
20190420_185627_compress_47.jpg
20190420_185627_compress_47.jpg (336.74 KiB) Viewed 130 times

Bertus Kruger
Site Admin
Posts: 1404
Joined: Wed Feb 03, 2016 10:26 pm
Location: Wellington , New Zealand
Contact:

Re: External drivers

Post by Bertus Kruger » Mon Apr 22, 2019 7:49 pm

No... Other way around.

Bertus Kruger
Site Admin
Posts: 1404
Joined: Wed Feb 03, 2016 10:26 pm
Location: Wellington , New Zealand
Contact:

Re: External drivers

Post by Bertus Kruger » Mon Apr 22, 2019 7:50 pm

when and from who did you buy these external driver?

ckoppenaal
Posts: 8
Joined: Fri May 18, 2018 1:11 pm

Re: External drivers

Post by ckoppenaal » Mon Apr 29, 2019 2:01 pm

I bought this from you about 9 months ago. Why do you ask?

ckoppenaal
Posts: 8
Joined: Fri May 18, 2018 1:11 pm

Re: External drivers

Post by ckoppenaal » Mon Apr 29, 2019 10:24 pm

So can I just rotate them 180 degrees or do I have the wrong ones because they don't seem to be working?

JuiceBox
Posts: 13
Joined: Mon Apr 15, 2019 3:57 am

Re: External drivers

Post by JuiceBox » Tue May 07, 2019 6:18 pm

Correct Driver boards- https://imgur.com/a/el4Vtv6

Incorrect Driver Board - https://imgur.com/a/ux8LMiL

You, like me, have incorrect driver boards. Mod went dark once I pointed it out and haven't heard anything from them since. 😕

IF (BIG IF) the board is correct and the silkscreen is what is wrong, all you'll have to do is flip the board 180° and then wire it such that
it matches this:

https://imgur.com/a/el4Vtv6

GND
ENABLE
STEP
DIR

but the label will be incorrect and this should get you moving.

Bertus Kruger
Site Admin
Posts: 1404
Joined: Wed Feb 03, 2016 10:26 pm
Location: Wellington , New Zealand
Contact:

Re: External drivers

Post by Bertus Kruger » Tue May 07, 2019 7:36 pm

"Houston we have a problem.."

ckoppenaal , I will email you shortly to talk about replacements.

berin
Posts: 37
Joined: Sun Sep 02, 2018 4:32 pm

Re: External drivers

Post by berin » Thu May 16, 2019 10:04 pm

My first posted photo correct install with all labeling needed. viewtopic.php?f=22&t=7171

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests