Zero - Nano

Post Reply
Posts: 1
Joined: Tue Nov 20, 2018 5:59 pm

Zero - Nano

Post by Driftwr » Tue Nov 20, 2018 6:09 pm

Hello, I am a new user and I have acquired a Zero plate.
My question is that I am using it where I had mounted an old nano arduino modifying the pins, my question is the hardware I used with nano arduino will be compatible.

Ds 3231
Sht 20
Relay 5V
Lcd I2c

Bertus Kruger
Site Admin
Posts: 1656
Joined: Wed Feb 03, 2016 10:26 pm
Location: Wellington , New Zealand

Re: Zero - Nano

Post by Bertus Kruger » Wed Nov 21, 2018 12:31 am

The NanoZero is 3.3V only... So you will need to make sure the device you link to it can also run at those voltgages.

(The relay might be an issue and the LCD will need to be 3.3V compatable)

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests