That doesn't sound correct, but I could be misunderstanding what you mean. Nevertheless, in this case with dual axis squaring you only make solder bridges only for the A3 & A4 labeled pins. You do not want to have any other solder bridges (X,Y,Z). It sounds like you have Dual Y setup, so make sure you change the config.h to `#define DUAL_AXIS_SELECT Y_AXIS` as the default is to clone the X axis with this firmware instead.PropellerHat wrote: ↑Fri Sep 04, 2020 1:11 pmThe most valued info right here, thanks! Going to try this on 2 machines this weekend.
Just one question: The bridging of the clone drive thingies... the way it is done in the second pic of the theme in https://wiki.protoneer.co.nz/Raspberry_Pi_CNC
right? (4th socket cloning Y axis) There are a couple of different pics in the web how to connect these dots and frankly the system could be more intuitive.
Thanks again mate!
This probably goes without saying, but just in case -- make sure you test this without the steppers actually able to rack the machine around so that it doesn't end up tearing itself apart if things aren't quite right on the first go.