Raspberry Pi - MegaPi Hat related Question/Answers.
- Site Admin
- Posts: 1705
- Joined: Wed Feb 03, 2016 10:26 pm
- Location: Wellington , New Zealand
Installation instructions below. I also updated the GitHub instructions.
Code: Select all
git clone https://github.com/Protoneer/RaspberryPi-Arduino-avrdude-rpi.git
- Posts: 135
- Joined: Wed Nov 09, 2016 8:52 pm
Just a few extra notes.
VERSION = '1.8.2'
To execute InstallArduino.sh
chmod u+x ./InstallArduino.sh
Then it works
- I still get an error with autoreset2560 : broken pipe
- Posts: 1
- Joined: Tue Jun 20, 2017 6:07 pm
Thanks for documenting the changes that need to be made in order to get the scripts to run.
I'm also experiencing the same timeout issue with my MegaPi hat. I'm working with a fresh install of the RPI CNC image on a Pi3, I reinstalled the Arduino software using gmoney484's tips.
I was able to get a sketch to upload by pressing the "reset" button on the hat just as the upload started.
Who is online
Users browsing this forum: No registered users and 1 guest