Page 1 of 1

laser control

Posted: Fri Jan 06, 2017 10:03 am
by luc
hi, is there a pin (like spindle or coolant) that I can use to controle a lasermodule ? I need 12 V and if possible pwm.

Re: laser control

Posted: Tue Jan 10, 2017 6:08 am
by Bertus Kruger
The Spindle Enable (PWM) pin is the one you are after. You will need to add a power mosfet / transistor to drive the signals at 12V cause the board is running at 5V.