clone y axis

Post Reply
Posts: 9
Joined: Tue Mar 19, 2019 7:50 pm

clone y axis

Post by proton258 » Wed Apr 24, 2019 8:31 pm


I would like to clone the Y axis on a 2.58 board but i am not sure how i should solder the connectors for the Y axis...

Can somebody provide me a picture of how they actually soldered the connections when they cloned they Y axis so i can copy what they did

I am confused in how i actually need to solder the connections to achieve the clone of the Y axis

Hope somebody can help me work this out


Posts: 83
Joined: Wed Jun 07, 2017 2:25 pm

Re: clone y axis

Post by StuartB » Wed Apr 24, 2019 11:41 pm

If I'm not mistaken, it looks like you just solder 2 links across the 4 Y Pads.
1 for Step and 1 for Direction.
800px-RPI-CNC-V258-CAD-Back.jpg (64.2 KiB) Viewed 541 times
316px-Raspberry_Pi_CNC_Clone_Z.png (11.49 KiB) Viewed 541 times

Posts: 292
Joined: Thu Nov 03, 2016 8:16 am

Re: clone y axis

Post by erniehatt » Thu Apr 25, 2019 6:04 am

Yes that is correct.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest