Running rotoneer board directly through Arduino scripting

Post Reply
support@astrinet.net
Posts: 2
Joined: Wed Sep 06, 2017 11:52 pm

Running rotoneer board directly through Arduino scripting

Post by support@astrinet.net » Thu Sep 07, 2017 2:29 am

I'm looking to control the protneer shield directly through the Arduino and not through the grbl control to run singl0e dutycycle automation. Pulse I need to run other sensors while running protneer shield. Also need a x,y,z,n axis control. So that all axis can be independent of each other. Advise please. I have modified the cbc machine to the automation functionality but now need to program it. Idea is to have a start switch that would initiate the cycle and then return home. I can make it work thru grbl control but it's not optimal because I need to run temp readings and scale weight readings along side of the automation. The scale and weight reading need to be on out into the automation for the process to be solid. Time delays provide to much error in weight calculations. I'll elaborate the automation procedure in next post. If needed

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest