Protoneer Product Forum

Hai I am looking for a way to compensate for backlash. I have found two software preprocessors and studying how to integrate them with USG. But currently I am studying the possibility of the direct add steps into the driver chip by manipulating the micro steppen. By dynamic changing between 1/4 1/8 ...

Hai I have problems using UG-code sender when I use G91 command. The visualiser is not working correctly. when I use the G91 command relative addressing. I use relative addressing for code that I have to repeat. But the software can not translate this to proper dimensions. Who has experience with a ...

Thanks for your reply

John

Hai I working now on my 3 the CNC machine, I need a large working area meter by 50 cm and high precision frees machine To let it work problerly, I need to clone X and Y axis. Is it prosible to use a second cnc shield for this purpose. When I wire all the PIns of the two CNC shields in paralel, it sh...

Yes I had a old version. I did by the new version and now all is working ok Thanks for the reply I am building now a improved version of my CNC designing a crossable and I like the idee of the touch probe or I like the idee of doing some image processing. he goal is to have a CNC machine that I can ...

Hai I am building a small CNC machine using a crostable and I use CNC shield version 3.0 and try to use GRBL 1.1 and the UGS. I can move the tabel but have problems withe the limit switches I rewired the wire from the Z + limit switch to SpnEnd. I did set $21=1 When I measure the voltage on the pins...