Expansion & Design Detail

WifiPixles = Wifi unit that can control a bunch of addressable RGB leds... :)
Post Reply
imlarry
Posts: 2
Joined: Sat Nov 26, 2016 1:51 am

Expansion & Design Detail

Post by imlarry » Sat Nov 26, 2016 2:33 am

Hi-

Just got my WifiPixel board (thank you Ebay, thank you NZ customs, thank you Protoneer) and am very happy with the "I'm alive" hello world and the nifty form factor .. I am hopeful I can build a fun piece of refrigerator art around it soon.

Is your design private or are you published on an open source source? I see that the board is provisioned for an SD socket as well as a USB power feed and I was (naturally/already/customers-are-never-satisfied/etc.) wondering which pins were soldered for a physical connection but were otherwise unoccupied and how I could easily exploit them- do you have any future plans or a scale of an order where it would make business sense to do a "devboard" version of these with the existing "futures" features populated and, potentially, a few more thru holes drilled to open pins and the power buses?

Thinking here of having access to do "hook pin 16 to reset for deep sleep" sorts of things and "my kingdom for an easy to solder I2C port" expandability using easy-to-route mods to the existing design to support the thru-hole crowd vs. any real changes- its already *very* nice as is and I just want to add more wires which is the best complement I can offer to your work. =)

Thanks,
Larry "just another solder junkie"

Bertus Kruger
Site Admin
Posts: 681
Joined: Wed Feb 03, 2016 10:26 pm
Location: Wellington , New Zealand
Contact:

Re: Expansion & Design Detail

Post by Bertus Kruger » Sun Nov 27, 2016 3:34 am

Hi Larry...

Design files are available here[Done in Kicad]: https://github.com/Protoneer/WifiPixels ... r/hardware

At the moment demand is very low as most people know about NeoPixels and I have been given a warning by Adafruit not to use their Trademark name with my item. So I am not really planning on expanding it at this stage... ;)

imlarry
Posts: 2
Joined: Sat Nov 26, 2016 1:51 am

Re: Expansion & Design Detail

Post by imlarry » Sun Nov 27, 2016 5:51 am

Thanks muchly for sharing the widget- if I manage to make something worth taking a picture of I will. =)

Bertus Kruger
Site Admin
Posts: 681
Joined: Wed Feb 03, 2016 10:26 pm
Location: Wellington , New Zealand
Contact:

Re: Expansion & Design Detail

Post by Bertus Kruger » Sun Nov 27, 2016 6:37 pm

imlarry wrote:Thanks muchly for sharing the widget- if I manage to make something worth taking a picture of I will. =)
Yes please. I am always interested in seeing what other people are making.. ;)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest