Timeout communicating with programmer

Raspberry Pi - MegaPi Hat related Question/Answers.
Bertus Kruger
Site Admin
Posts: 737
Joined: Wed Feb 03, 2016 10:26 pm
Location: Wellington , New Zealand
Contact:

Re: Timeout communicating with programmer

Post by Bertus Kruger » Sun May 07, 2017 7:43 pm

Mmmm...

Installation instructions below. I also updated the GitHub instructions.

Code: Select all

cd ~
git clone https://github.com/Protoneer/RaspberryPi-Arduino-avrdude-rpi.git
cd RaspberryPi-Arduino-avrdude-rpi
./InstallArduino.sh

gmoney484
Posts: 35
Joined: Wed Nov 09, 2016 8:52 pm

Re: Timeout communicating with programmer

Post by gmoney484 » Sun May 07, 2017 10:29 pm

Just a few extra notes.

Change config.cfg
VERSION = '1.8.2'

To execute InstallArduino.sh
chmod u+x ./InstallArduino.sh

then
./InstallArduino.sh

Then it works :) - I still get an error with autoreset2560 : broken pipe
Gavin Milne
HoD Science
Dilworth School

mfpiechowski
Posts: 1
Joined: Tue Jun 20, 2017 6:07 pm

Re: Timeout communicating with programmer

Post by mfpiechowski » Tue Jun 20, 2017 6:14 pm

Thanks for documenting the changes that need to be made in order to get the scripts to run.

I'm also experiencing the same timeout issue with my MegaPi hat. I'm working with a fresh install of the RPI CNC image on a Pi3, I reinstalled the Arduino software using gmoney484's tips.

I was able to get a sketch to upload by pressing the "reset" button on the hat just as the upload started.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest